TOX PRESSOTECHNIK
CN: +86 512 53582248

FlexPress Compact – the compact manual workstation

Flexible to use for all kinds of assembly tasks

The industrial requirements for data acquisition and evaluation of the assembly processes of several components are continuously growing. To ensure a consistently high quality, it is no longer sufficient to manually declare assembled components as in order or not in order. The traceability of individual processes is of particular relevance here. 
Safe production, which corresponds with the highest quality requirements, is only ensured through the identification and analysis of your process data and valid database.

TOX® FlexPress Compact

The TOX® FlexPress Compact provides a manual workstation for precise work results with seamless process monitoring.
Proven mechanics and know-how spanning several decades in press manufacturing meet process monitoring with the latest features and a sophisticated control concept.
Available in four versions: 5kN, 10kN, 30kN, 60kN

Proven mechanics, compact footprint

The workstation is driven by the electromechanical servo presses of the TOX® ElectricDrive series. Our EQe-K and EXe-K ElectricDrives with integrated force and travel sensors are used in this press series.

The press design consists of a welded frame with the drive, safety equipment, housing and drive cover. This design promises a long service life and a low noise level for operators.
The operation of the FlexPress Compact is not only very quiet, but it also has a small footprint. All technologies mastered by TOX® are realized on in just 425 mm x 703 mm x 1402 mm. Even with the base frame/table, this corresponds to less than 1 square meter in your workshop.
 

This content is blocked due to restrictions of your browser/firewall

Intuitive control concept – maximum safety

You will not find a control cabinet on the FlexPress. The often-bulky control enclosure is inside the press with the new ElectricControl Core concept.

The operators control the assembly workstation via the 13" UDI Panel. It is an operating unit, process monitoring screen and analysis tool in one – a Universal Data Interface.

Ergonomic requirements of the workers were given special consideration for the FlexPress Compact

Another highlight of the control concept is the RGBW-illuminated work area. This illumination acts as status display following completion of a cycle. In case of a green light, the next work step can follow immediately.  In case of a red light, the component does not meet the required quality windows. The advantage of the immediate optical feedback for the operators is that their focus remains on the work area, not switching to the monitoring screen.

 

Furthermore, additional ergonomic and safety-relevant aspects have been implemented:

  • Electrical safety door - safe, quiet and quick
  • Contoured housing for optimum visibility of the tools and components, independent of the working height

Your process data: From recording to evaluation

Whether you are working with the TOX®-Software as the operator, maintenance staff, process engineer, commissioning engineer or quality manager, the HMI impresses with customizable screens as well as clear, freely definable dashboards. Parameterization, operation, process monitoring, diagnosis and evaluation as well as quality management are integrated in the TOX® Software and TOX® SystemControl Core:

  • Ethernet transfer of process data archiving and much more
  • 5000 diagram points per process
  • 10 process display in a diagram
  • 5 windows per process freely definable

 

The FlexPress Compact is perfectly prepared for functional extensions in the tool room:

  • 2 M12 inputs for component sensors
  • 1 Ethercat connection for intelligent bus module
  • 1 pneumatic connection 
     

Flexibility of application

All technologies mastered by TOX® are realized in the assembly workstation. Whether it is accurate pressing in and pressing on processes, or simple clinch connections – the FlexPress Compact comprehensively covers the technology portfolio of TOX®.
The simple set-up of the desired process and a quick tool change ensure maximum flexibility for the application.

For example, the manual workstation enables the production of prototypes in small quantities early in the shift, then, with an easy change-over, series production of other components later.


You can also get the associated tools in accordance with your ideas and wishes directly from TOX® PRESSOTECHNIK at the same time.

Options

Press functionality can be expanded via an intelligent bus module in the work area.


The FlexPress Compact is already prepared for the following options:

  • Spray unit
  • Manual or automatic tensioners
  • Additional component sensors
  • Additional external force sensor
  • Additional external travel sensor
  • Pneumatic valves
  • Electrical actuating drives
  • Manual scanner via USB
  • External start button
     

Applications

冲压连接
冲压连接是一种无需使用螺栓、铆钉或胶粘剂即可将金属板件与其他材料固定在一起的冷成形工艺。
了解更多
冲压连接冲压连接
冲压
TOX®-夹钳、冲压机机身和冲压机具有广泛的应用可能
了解更多
冲压冲压
装配
压入和安装轴套和轴承,生产精密的压力装配件
了解更多
装配装配
紧固件嵌入
用于嵌入功能件的完整系统解决方案
了解更多
嵌入嵌入
压印
必须标识您的产品?需要可靠地固定部件以便进行更多加工?
了解更多
压印压印
铆接
我们为您提供适合铆接、卷边、扩口等应用的高度灵活的标准化产品...
了解更多
铆接铆接
冲孔
不论您想要加工金属板件、塑料、纸箱板、纺织品还是箔材,我们都能轻松应对
了解更多
冲孔冲孔

地址

SUZHOU TOX® PRESSOTECHNIK Co. Ltd.
No. 58 East Nanjing Road
215400 Taicang City
电话: +86 512 53582248
Fax: +86 512 53582289
联系人
CN: +86 512 53582248 联系人表格
 
Cookie Information

为了能以最好的方式向您展示我们网站的内容,我们使用了 Cookies。您可以通过浏览器中的设置来阻止 Cookies 或者调整它的安全级别。